Everliner - PondGuard EPDM Fish Pond Liners

at DripWorks		800/522-3747 Hours M-F 8:00 to 5:00 PDT 190 Sanhedrin Circle Willits, CA 95490
Jump to catalog page:
Home Catalog Request Catalog View Catalog (PDF) Pond Liners Polyethelene Liner EPDM Liner Pond Aeration Aquatron Microbes Links Page Link to Us Contacts Store Pond Kits Pond Liners Pond Pumps Filters Aerators Pond Care Pond Books Special Products Calculators Pond Volume Estimator EPDM Liner Calculator Poly Liner Calculator Checkout Dripworks Dripworks Home Page Dripworks Store Help

EVERLINER POND LINERS

PondGard EPDM RUBBER LINERS

Extremely flexible, Firestone PondGard EPDM rubber liners adapt very well to the irregular shapes of decorative ponds.

Pond builders appreciate its ability to conform to the shelves needed for plant containers. Landscapers prefer it for its ease of installation. When finished, your pond will have a "natural" look. Our 45 mil rubber liner is UV stabilized and impervious to extremes of temperature. It will remain flexible in all conditions without cracking or blistering. Its expected life is over 30 years when fully exposed to the sun. We strongly recommend you have our pond liner samples in hand before you order.

Call 800.522.3747 to order our catalog with samples,
or order a free catalog on line.
Click here for our pricing schedule.

Estimating The Size Of The EPDM Liner

To estimate the amount of material needed:

Measure the length and width of the pond.
Measure the depth of the pond and double it. Add this number to both the length and width measurements.
Now add 5 feet (2 1/2 feet per side) to the length and to the width for the apron (see the illustration below) on a small pond. (Length x Width is less than 1000 sq. ft.). Add 10 feet for the apron and trench on a large pond.
OR, If the pond has already been dug, measure across the bottom (length & width) and add material for the apron.

INSTALLING AN EPDM LINER

"Our pond is up and running and we have VERY happy koi who thank us everyday for their new home.
The EPDM liner was a joy to install and is nearly wrinkle free. You cut the material perfectly and we cannot tell you how pleased we are with your product. The softness of it made it so easy to work with. It is ideal for the small pond owner. Our fish thank you very much."
F.R. - Palo Cedro, CA

1.
Line out area with string and stakes. Levels should be established before any excavation.

2.
Excavate Area
Goals: a) Level sides. b) Vertical edge, depending on soil type. c) Plant shelf 12-18" all around. d) Spillway to allow water to flow out of the pond. e) Accurately measure the longest and widest dimensions for your liner.

3.
Lay in underlayment and liner, hold it in place with rocks while filling. Leave one foot of excess around the outside of the pond for anchoring (apron).

4.
Cut off excess liner material. Add fish and plants. Landscape and ENJOY.

	AFTER THE LINER IS IN Once the liner is in, you will want to put in a pump to circulate the water and a filter to remove debris. You may also want to consider a pond aerator to oxygenate the water for fish and other pond life, beneficial bacteria to help improve the pond's quality and clarity and perhaps a water feature such as a waterfall or a fountain.

BACK TO POND PAGE
ORDER CATALOG AND SAMPLES

revised 08/22/2007

All photos are the sole property of DripWorks. Republication or redistribution of
Everliner content is expressly prohibited without the prior written consent of Everliner.
Contact us by email at everliner@everliner.com
Concerned about your personal information? View privacy policy

PondGard EPDM RUBBER LINERS

Estimating The Size Of The EPDM Liner

To estimate the amount of material needed:

INSTALLING AN EPDM LINER

AFTER THE LINER IS IN